ATtiny85 USB Development Board

Description

The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (of course a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this ATTINY85 USB Development Board is a great way to jump into microcontroller electronics.

ATtiny85 based microcontroller development board come with the USB interface. Coding is similar to Arduino, and it uses the familiar Arduino IDE for development. This is a digispark clone.

It has 6 port with several functions. Depending on the programming (with Arduino IDE) can it have 6 digital I/O, 4 analog inputs or 3 PWM outputs. It can be powered by a USB port or an external power supply of 6-35V DC.

 

Features :

  1. Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).

  2. Power via USB or External Source or 7-16 v to 5 v (automatic selection).

  3. The On board, 150 ma 5 v Regulator.

  4. Built in USB and serial was debugging).

  5. 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).

  6. 8 k Flash Memory (about 6 k after bootloader).

  7. The I2C and SPI (vis USI).

  8. PWM on 3 pins (more possible with Software PWM).

  9. The ADC on 4 pins.

  10. The Power LED and the Test/Status leds.


 

Reviews

₹268.0
Price - ₹245.0
Raspberry Pi
Arduino
Programmers
ARM Microcontroller Board
Modules
Sensors
Display Devices
Oscilloscope & Signal Generator
Cooling Fan
3D Printer
Robot Parts
Motor
Power Supply
Development Board
Tools & Connectors
BREAD BOARD
Electronic Components
TEST DUMMY
Robotics
Sensors & Module
6V Two Wire Digital Display Electric Quantity Meter Battery Level Indicator
A2212 1000 KV BLDC Brushless DC Motor for Drone WITH CONNECTOR
Boards & Programmer
ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board
Module for ESP32 CAM Development Board
CP2102 Micro USB Module
power supply
CNC 3D Printer Mech Endstop Switch For RAMPS 1.4
TP5000 Battery Charging Module – 4.2V/3.6V
Mini Ultra-Small Size ESP- M3 from ESP8285 Serial Wireless WiFi Transmission Module Fully Compatible with ESP8266 AT the Firmware
18650 5V 2.4A Lithium, Battery Digital Display, Charging Module Dual, USB Output Band, Display Booster, Mmodule
2.8 Inch TFT LCD Non-Touch display module(SD card support)
Batteries and Charger
Solar Panel Controller
controller
Temperature & Humidity
Drone Motor
Model Building kit